How do I flare out the end of the barrel like this...
-
Rayman_1337
- Private 3
- Posts: 47
- Joined: Fri May 04, 2007 12:50 am
How do I flare out the end of the barrel like this http://www.spudfiles.com/forums/my-tenn ... t7754.html
-
jackssmirkingrevenge
- Five Star General
- Posts: 26216
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 576 times
- Been thanked: 347 times
as far as I know the pipe comes like that ready made to enable push-fit connections...
hectmarr wrote:You have to make many weapons, because this field is long and short life
yea, it comes like that, you just gotta buy the end. it like that so they can connect lots of pipe without having to buy adaptors.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you can do that, ive done it. just heat in the oven for a little while (about 3 or 4 minutes) and take it out (with gloves) and shape it with something cone-like shaped. i did it and it worked ok, but looked crapy, but with practice it will look good.frankrede wrote:You might be able to make it using a heat gun and some type of brace to help it mold.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
-
Rayman_1337
- Private 3
- Posts: 47
- Joined: Fri May 04, 2007 12:50 am
Alright thanks for all your help, my spud gun is coming along nicely, couldnt have done it with out the help of the forums.