This is my cannon purple storm
- pyromaniac
- Corporal 4
- Posts: 805
- Joined: Tue Feb 27, 2007 7:18 pm
- Location: MO
Primer is a solvent it makes the chamber weaker. plus it has dwv on it.
it's i wouldn't even thouch it.
it's i wouldn't even thouch it.
:pottytrain3:
can i start giving "HI AWARDS"? if so, i give you a HI AWARD for the best paint job on spudfiles, congratulations!
ohh and by the way, yes the primer does make it softer, when its wet that is. when it is dry it is accually stronger.
just to be safe, id wrap it and mesh and duct tape. it wont really hurt the looks because i cant think of anyway to make it worse.
cool cannon, makes me want to make one. once i thought of covering me cannon in primer, but did because i thought it would be a waste.
ohh and by the way, yes the primer does make it softer, when its wet that is. when it is dry it is accually stronger.
just to be safe, id wrap it and mesh and duct tape. it wont really hurt the looks because i cant think of anyway to make it worse.
cool cannon, makes me want to make one. once i thought of covering me cannon in primer, but did because i thought it would be a waste.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
-
- First Sergeant 3
- Posts: 2400
- Joined: Wed Oct 18, 2006 11:12 pm
- Has thanked: 2 times
- Been thanked: 10 times
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 3:33 pm, edited 1 time in total.
- homedepotpro
- Specialist 4
- Posts: 443
- Joined: Sun Nov 26, 2006 1:00 am
primer softens the pipe and the glue welds it together with other pipe. primer does not make the pipe stronger, i can scratch the primer dissolved pvc with my finger nail, it is not stronger
o shit i did not know so i guess i cant use the chamber for a new project either and look quit saying stuff about how bad the primer looks just give me some helpful info so i can learn and not kill my self shooting one of these things oh and two more things how dose the trigger on a modded sprinkler valve work and can you make your on triggers out of air nozzles my dad said some have some sort of safety thing on them and 2 thankx for all your comments.
novus okdo seclorum the u.s. study latin![]()
For a pneumatic... use pressure rated pipe and nsf-pw fittings. If you dont know if your pipe is pressure rated... ask the salesperson, if they cant tell you and you cannot see an obvious rating printed on the pipe, dont but it. Another tip on how to not kill yourself... next time dont douse the entire cannon with primer...
The modded sprinkler works with pressure differences. when you fill the chamber side, the diaphragm(sp?) seals the barrel side. When you open the blowgun and vent the under the diaphragm, it moves down/up and allows the compressed air from the chamber escape out the barrel. This is a great how to mod your sprinkler: http://www.spudfiles.com/forums/modding ... -t305.html
Some blow guns have a safety that locks the trigger but this can be easily achieved with a standard blowgun as well.
Good luck with your next cannon and as always... safety first.
The modded sprinkler works with pressure differences. when you fill the chamber side, the diaphragm(sp?) seals the barrel side. When you open the blowgun and vent the under the diaphragm, it moves down/up and allows the compressed air from the chamber escape out the barrel. This is a great how to mod your sprinkler: http://www.spudfiles.com/forums/modding ... -t305.html
Some blow guns have a safety that locks the trigger but this can be easily achieved with a standard blowgun as well.
Good luck with your next cannon and as always... safety first.
- turbohacker
- Specialist 3
- Posts: 392
- Joined: Wed Dec 20, 2006 12:34 am
Oh my F$%@*G gosh!!!
I need to take a picture of this and put it on the wall of shame!
I dont mean to sound as offensive as I do, your ideas were harmless enough but are very dangerous. I would scrap the entire gun and start over now that you know what not to do.
Also if you mean that your going to connect CO2 DIRECTLY to the gun and release the pressure before it detonates, DONT!!! CO2 should only be connected to a pvc gun if their is a regulator. A CO2 tank has about 1500 PSI, PVC is rated to only 250 PSI, See a slight problom their? HINT-BOOM!! Also try a regulator like mine if you are looking for a cheap alterative to a paintball reg sorry one sec on that picture
I need to take a picture of this and put it on the wall of shame!
I dont mean to sound as offensive as I do, your ideas were harmless enough but are very dangerous. I would scrap the entire gun and start over now that you know what not to do.
Also if you mean that your going to connect CO2 DIRECTLY to the gun and release the pressure before it detonates, DONT!!! CO2 should only be connected to a pvc gun if their is a regulator. A CO2 tank has about 1500 PSI, PVC is rated to only 250 PSI, See a slight problom their? HINT-BOOM!! Also try a regulator like mine if you are looking for a cheap alterative to a paintball reg sorry one sec on that picture
no sh@t i know you need to regulated and tomorrow morning i'm going to bust it up and send it to the dump ok this was my first post my next one will be in awe i am making sompthing sweet so look for it in about a month it will probly be called chaos or havoc from above. and i learned some stuff and this next ne will be painted not purple and possibly have some gold on it.turbohacker wrote:Oh my F$%@*G gosh!!!
I need to take a picture of this and put it on the wall of shame!
I dont mean to sound as offensive as I do, your ideas were harmless enough but are very dangerous. I would scrap the entire gun and start over now that you know what not to do.
Also if you mean that your going to connect CO2 DIRECTLY to the gun and release the pressure before it detonates, DONT!!! CO2 should only be connected to a pvc gun if their is a regulator. A CO2 tank has about 1500 PSI, PVC is rated to only 250 PSI, See a slight problom their? HINT-BOOM!! Also try a regulator like mine if you are looking for a cheap alterative to a paintball reg sorry one sec on that picture

- pyromaniac
- Corporal 4
- Posts: 805
- Joined: Tue Feb 27, 2007 7:18 pm
- Location: MO
Ok good and please promise us you will get pressure rated parts?
:pottytrain3:
I liked it..........
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
on my next one and all the rest i will and i,m even building a carrage for this thing i figure it shower bb's about 5000, in a spray at 33 ft. wiping out all paper targets thats the airsoft side of it then in a last ditch defence in attack by a tin can lol. you can shoot 1 aa battery at 95 psi with the axullry weapon it will probly be mounted on a rifle.
- turbohacker
- Specialist 3
- Posts: 392
- Joined: Wed Dec 20, 2006 12:34 am
Sorry, I didnt mean to be such an ass (I just re read my post) I like seeing new members to the spudding community. I look forward to seeing your new gun 
