Page 1 of 1
Semi Auto Ideas for a 3/4 inch Piston Valve?
Posted: Wed Oct 02, 2013 3:41 pm
by 1nxtmonster
Hi guys. This is my first spudfiles post. I have recently built a piston valve paintball gun. It is a 3/4 inch piston valve with about a 100 cubic inch air tank. It works great, but I want to get multiple shots off of one tank. I could do a ball valve to fill a secondary chamber from the main chamber, but I want something that lets the gun be completely semi-auto. Maybe like an air restrictor between the piston valve and air tank? You help would be greatly appreciated.
Posted: Wed Oct 02, 2013 10:29 pm
by Gippeto
Posted: Wed Oct 02, 2013 10:43 pm
by dart guy
Take a look at the new pneumatic sniper in the show case and you can read how I would make it semi auto
Posted: Thu Oct 03, 2013 5:28 am
by jackssmirkingrevenge
What Gippeto said, you can make it easily and cheaply with off-the-shelf parts
Posted: Thu Oct 03, 2013 5:42 am
by dart guy
ther is also a how to on it in this forum so press the forum button and find it.
Posted: Thu Oct 03, 2013 6:43 am
by 1nxtmonster
Would a ball valve before the piston valve that fills a small "firing chamber" work? Could you just crack the ball valve and let it auto fill?