Dan003400's 3rd Pnuematic Gun
Posted: Thu Oct 26, 2006 11:20 pm
this gun is gay!
have lathe now!!
have lathe now!!
paint is cherry red with orange/yellow flames coming up the barrel SpudFiles
Earth's largest potato gun resource
https://www.spudfiles.com/
Dan003400's 3rd Pnuematic Gun
Page 1 of 1
Posted: Thu Oct 26, 2006 11:26 pm
paint is cherry red with orange/yellow flames coming up the barrel Posted: Thu Oct 26, 2006 11:28 pm
Very nice and clean, you should use ~3 feet of 4" pipe for the chamber with that barrel. You may need to sleave a barrel that ling to prevent explosion (bad), and make it stiffer (good).
Posted: Fri Oct 27, 2006 12:17 am
Yrea i know 2" Sch 80
Posted: Fri Oct 27, 2006 4:11 pm
looks good. show us some damage pics. how long is the barrel?
Re: Dan003400's 3rd Pnuematic Gun
Posted: Fri Oct 27, 2006 4:22 pm
Dan003400 wrote:....A five foot long barrel that can shoot Golf Balls (1.5 Inch STR 21)
Posted: Fri Oct 27, 2006 5:03 pm
SDR but yeah, this is our best gun together yet, but me n gort are workin on some new stuff but hes busy lately. like 1.25" porting bst valves and stuff. this is my first encounter with a glued "T" valve gun. i like threads but all we really shoot is golf balls and taters right now.
Posted: Fri Oct 27, 2006 9:49 pm
Nice cannon you got there. Very clean, and the valve looks extremely powerful as well.
I wish I had some constructive critisicm, but I can't see anything wrong (except you need to add a chamber )
Awesome build dude. Each one of your cannons is a HUGE improvement from the last (and your second was really good too)
I wish I had some constructive critisicm, but I can't see anything wrong (except you need to add a chamber
)Awesome build dude. Each one of your cannons is a HUGE improvement from the last (and your second was really good too)
Posted: Fri Oct 27, 2006 10:48 pm
Yep chamber is pretty important.
Posted: Sat Oct 28, 2006 1:39 am
I'm rubbin off on 'im.
Nice job dude. You and Boomer have been advancing really quickly. I assume it has to do a lot with being around me but I cant take all the credit. You two are some smart guys and I'm happy to have ya around.
I know you couldn't have done an o-ring because I haven't had you guys over to use the lathe for over a week. Did you just teflon tape that back cap?
Speaking of 4" chamber, we still have to move the 4" pipe to the workshop. I know Brian has some at his house along with some 3" 80.
After I order parts, I think it's time we build that dual Mauler cannon so keep that in mind and we will find a time to meet up. I wont be available until maybe Wednesday evening. Maybe then we can begin some planning.
Again, nice valve there dude. I look forward to seeing it fire soon.
Nice job dude. You and Boomer have been advancing really quickly. I assume it has to do a lot with being around me but I cant take all the credit. You two are some smart guys and I'm happy to have ya around.
I know you couldn't have done an o-ring because I haven't had you guys over to use the lathe for over a week. Did you just teflon tape that back cap?
Speaking of 4" chamber, we still have to move the 4" pipe to the workshop. I know Brian has some at his house along with some 3" 80.
After I order parts, I think it's time we build that dual Mauler cannon so keep that in mind and we will find a time to meet up. I wont be available until maybe Wednesday evening. Maybe then we can begin some planning.
Again, nice valve there dude. I look forward to seeing it fire soon.
Posted: Sat Oct 28, 2006 2:15 am
Good job man, that's the same size im looking to make but I'm thinking I may need a little help, but we'll save that for the day I can go buy parts.
I wish I had somewhere to make kool stuff, how much harder is it to use a metal lathe than a wood. I used a wood for the last 2 years I was in shop and got really good, not what I would call expert because that would be tooting my own horn.[/u]
I wish I had somewhere to make kool stuff, how much harder is it to use a metal lathe than a wood. I used a wood for the last 2 years I was in shop and got really good, not what I would call expert because that would be tooting my own horn.[/u]