Co2 tank threads!
- iPaintball
- Corporal 2
- Posts: 695
- Joined: Sun Mar 04, 2007 8:37 pm
I'm considering using a 10 oz paintball Co2 tank as a chamber for my in-the-works qev marble gun. I removed the pin valve, but I can't seem to find the thread size of the actual cylinder anywhere! If anyone knows the thread size, please tell me! I need help!
CGA 320 i believe
Edit... yes it is
palmers has an addapter to 1/8
https://www.palmer-pursuit.com/ecom/pro ... f55d1c9fea
They also have a stainless version... but its double priced
Edit... yes it is
palmers has an addapter to 1/8
https://www.palmer-pursuit.com/ecom/pro ... f55d1c9fea
They also have a stainless version... but its double priced
- iPaintball
- Corporal 2
- Posts: 695
- Joined: Sun Mar 04, 2007 8:37 pm
No. CGA 320 is the the thread size for the outlet threads (ASA).
That adapter screws into a bottom line. I need to know the threads of the actual cylinder...
That adapter screws into a bottom line. I need to know the threads of the actual cylinder...
Take your pin valve drill it out, and tap it.. with a NPT thread
Or email Mr.Palmer... or Doc from docsmachine.com
one of them will deffinalty know...
or you can email one of the airsmiths at PTI. paintball training institute.
Or email Mr.Palmer... or Doc from docsmachine.com
one of them will deffinalty know...
or you can email one of the airsmiths at PTI. paintball training institute.
- iPaintball
- Corporal 2
- Posts: 695
- Joined: Sun Mar 04, 2007 8:37 pm
Wow, I'm ashamed that I didn't think of that myself...Thanks Scope!
Haha no problem!!
hope it works for ya
hope it works for ya
- iPaintball
- Corporal 2
- Posts: 695
- Joined: Sun Mar 04, 2007 8:37 pm
Thanks. if it does work, it'll look awesome...
If it works well for you just tell me because i have a bummed 9oz
-
- Specialist 2
- Posts: 283
- Joined: Wed Jan 03, 2007 8:59 pm
you could build a sweet hybrid with one of thoose bottles that or if u make a pnumatic run it off unreged scuba air thoose c02 tanks are made to hold 3k psi at least cause the burst disk on the pin valve pops at 3k
- spudthug
- Corporal 5
- Posts: 936
- Joined: Mon Feb 26, 2007 9:02 pm
- Location: johnsonburg, Pa USA
- Contact:
why would u make a hybrid out of a c02 containtor...and using unregulated scuba tank is incredibly stupid..
4" piston valved cannon-half done..( i spilt my cement...)
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
-
- Specialist 2
- Posts: 283
- Joined: Wed Jan 03, 2007 8:59 pm
you would make a hybrid from a co2 tank because it could probably take a 50x mix without blowing up and using unregged scuba in a gun with a metal chamber rated to 3kpsi is not stupid seeing a completly full to the brim scuba tank is only 3k psispudthug wrote:why would u make a hybrid out of a c02 containtor...and using unregulated scuba tank is incredibly stupid..